Brass Shower Arm Fitting

Linear Length

Linear Length - The dimension markings indicate a total length of approximately 400 mm, providing a long horizontal projection from the wall. This length allows the shower head to be positioned well away from the wall surface, improving water coverage over the user. Compared with arms shorter than 300 mm, a 400 mm extension can shift the spray center forward by more than 30 percent, reducing splash-back and improving overall shower comfort.

Rectangular Section

Rectangular Section - The body displays a consistent rectangular cross-section measuring approximately 35 mm in width and 15 mm in thickness. This shape increases bending resistance compared to thinner round tubes. Under typical shower head loads approaching 2 kg including dynamic water movement, a rectangular profile improves stiffness and helps maintain alignment over long-term use.

Solid Weight

Solid Weight - The scale image shows a measured weight of approximately 383 grams, indicating dense brass construction. At this mass, the fitting can withstand repeated pressure cycles and mechanical loads without deformation. The added weight improves vibration damping, reducing micro-movement at the threaded joints during high-flow operation.

Dual Thread Ends

Dual Thread Ends - Both ends of the fitting feature threaded connections consistent with standard G1/2 specifications, with an approximate outer diameter of 20.95 mm. This allows direct compatibility with common wall outlets and shower heads. Adequate thread length supports secure engagement and reliable sealing under working pressures typically ranging from 0.2 to 0.6 MPa.

Polished Finish

Polished Finish - The exterior presents a smooth, reflective surface with clean edges and flat planes. Polished brass fittings typically achieve low surface roughness values, which helps limit mineral buildup in water conditions exceeding 100 ppm hardness. This finish also simplifies cleaning and maintains a consistent appearance despite constant exposure to moisture.

Brass Shower Arm Fitting Application

Home Bathroom

Home Bathroom - In residential shower installations, this brass shower arm fitting provides a fixed and predictable spray position for daily use. The long reach places the shower head centrally over the user, improving comfort and ensuring even water distribution.

Walk-In Shower

Walk-In Shower - In walk-in shower designs, correct spray positioning is essential to prevent water escaping the shower zone. The 400 mm projection places the shower head farther inward, reducing floor wetting outside the intended area.

Apartment Bathroom

Apartment Bathroom - In apartment installations with standardized plumbing layouts, this fitting integrates easily without additional adapters. Its fixed geometry ensures consistent performance across multiple units and simplifies maintenance.

Renovation Project

Renovation Project - During bathroom renovations, existing wall outlet positions may not align with updated shower layouts. This fitting adapts the spray location without requiring internal plumbing changes, allowing functional upgrades while preserving wall structure.

Hotel Bathroom

Hotel Bathroom - In hospitality environments, fixtures must deliver consistent performance for guests of varying heights. The rigid structure ensures stable spray positioning, reducing adjustment needs and minimizing service interventions.

Commercial Shower

Commercial Shower - In commercial or shared shower facilities, durability and resistance to frequent use are critical. The solid brass construction supports continuous operation under repeated pressure cycles while maintaining alignment over time.

Modern Bathroom

Modern Bathroom - In contemporary bathroom designs emphasizing clean lines and minimal detailing, the straight rectangular form and polished surface integrate seamlessly with other angular fixtures, supporting a cohesive and orderly visual layout.